|
| |
NEW, VANGUARD, MODEL LD40, SUPER HEAVY DUTY CNC LATHE
Serial
Number:
SWING OVER BED: 40"
SWING OVER CROSSLIDE: 25"
CENTER HEIGHT: 20"
BED WIDTH: 24"
WIDTH OF CARRIAGE: 37"
WIDTH OF CROSSLIDE: 16"
DISTANCE BETWEEN CENTERS: 197"
HEADSTOCK
SPINDLE BORE: 12"
SPINDLE NOSE: A2-20
SPINDLE SPEED: 7-400 RPM
SPINDLE POWER: 31 HP
TURRET
H4 HYDRAULIC OR V8 HYDRAULIC
TAILSTOCK
QUILL DIAMETER: 6.5"
QUILL TRAVERSE: 9.8"
TAILSTOCK CENTER: NO. 6 MT
BODY MOVEMENT: MOTORIZED
QUILL MOVEMENT: ELECTRIC/MANUAL OR HYDRAULIC (OPTIONAL
FEED
X-AXIS RAPID TRAVERSE: 197"/MIN.
X-AXIS BALL SCREW DIAMETER: 1.6"
X-AXIS FEED RANGE: .004"/MIN - 118"/MIN.
X-AXIS TRAVERSE: 25"
X-AXIS SERVO MOTOR: 3KW
Z-AXIS RAPID TRAVERSE: 196"/MIN.
Z-AXIS BALLSCREW DIAMETER: 2.5"
Z-AXIS TRAVERSE: 197"
Z-AXIS TRANSMISION: SERVO MOTOR TRANSMITTED
THROUGH 1:4 PRECISION GEAR REDUCER
Z-AXIS SERVO MOTOR: 4KW
STANDARD ACCESSORIES:
22/26KW AC SPINDLE MOTOR
FANUC OI-TB CONTROLLER
H4 OR V8 HYDRAULIC TURRET
REAR SPLASH GUARD, FRONT TWO DOORS
FRONT CHIP AUGER, REAR CHIP CONVEYER, TWO CHIP
CARTS
AUTO LUBRICATION, COOLANT SYSTEM
OPERATION MANUAL, ELECTRIC MANUAL, CONTROL
MANUAL, PARTS LIST
ROTATING TAILSTOCK QUILL DIAMETER 165MM.
ELECTRIC & MANUAL QUILL MOVEMENT
TAILSTOCK BODY MOTORIZED MOVE
HALOGEN LIGHTS, TOOL BOX & TOOLS
SPINDLE SLEEVE, SPINDLE CENTER, TAILSTOCK CENTER
FOUNDATION PADS, LEVELING SCREWS
ONE SET OF STEADY REST 30-300MM OR 255-455MM
TOOLING:
H4: 50MM BORING BAR TOOL HOLDER X 2 PCS
BORING BAR SLEEVE (40, 32, 25, MT#4) EACH 2PCS
V8: TURNING TOOL HOLDER X 4PCS
EXTEND TOOL HOLDER X 2PCS
50MM BORING BAR TOOL HOLDER X 4PCS
BORING BAR SLEEVE (40, 32, 25, MT#4) EACH 2PCS
LD SERIES OPTIONAL ACCESSORIES (1):
CONTROL:
1. FANUC 21I-TB INSTEAD OF FANUC OI-TB $10,260
2. FANUC 18T INSTEAD OF FANUC OI-TB
$14,660
3. FAGOR 8055 INSTEAD OF FANUC OI-TB
$7,340
SPINDLE MOTOR:
1. 30/37KW $6,800
TAILSTOCK:
1. HYDRAULIC QUILL INSTEAD OF STANDARD QUILL
$1.840
STEADY REST:
2. CAPACITY: ?30-300MM
$2,120
4. CAPACITY: ?280-550MM
$2,780
FOLLOW REST:
1. CAPACITY: 30-230
$1,180
BORING ATTACHMENT:
1. BORING BAR SUPPORT (WITH DIAMETER 153MM) $2,560
2. BORING BAR (DIAMETER 153MM, LENGTH 1200MM) $2,560
3. BORING BAR (DIAMETER 153MM, LENGTH 1500MM) $2,940
4. BORING BAR SLEEVE $440
FULL GUARDING: $11,900
TRANSFORMER:
1. 45KVA $2,150
FRONT CHIP CONVEYOR INSTEAD OF CHIP AUGER: $9,850
|
