|
| |
NEW, VANGUARD 5" CNC TABLE TYPE HORIZONTAL BORING MILL, MODEL TH6513
Serial
Number:
WORKTABLE
DIMENSION OF WORKTABLE: 1400 X 1600MM
MAX. LOAD OF WORK TABLE: 10000 KG
NUMBER OF SLOT FOR WORK TABLE: 28 X 9
SPINDLE DIAMETER: 130MM
SPINDLE TAPER: ISO 7:24 NO. 50
SPINDLE SPEED: 10 - 2000 R/MIN (STEPLESS)
MAX. TORQUE OF SPINDLE: 2000 N.M
MAX. TRAVEL OF WORK TABLE X: 2000MM
MAX. TRAVEL OF HEADSTOCK Y: 1600MM
MAX. TRAVEL OF COLUMN Z: 1600MM
CNC TRAVEL OF SPINDLE W: 800MM
ROTARY OF WORKTABLE B: 360/0.0010
DISTANCE BETWEEN THE CENTER OF SPINDEL AND THE
SURFACE OF WORKTABLE: 100 - 1700MM
MIN. DISTANCE BETWEEN THE NOSE TO THE CENTER OF
WORKTABLE: 17MM
FEED SPEED X, Y, Z: 1 - 6000MM/MIN
W: 1 - 3000MM/MIN
B: 0 - 1 R/MIN
RAPID TRAVERSE X, Y, Z: 9000 MM/MIN
W: 3000MM/MIN
B: 1 R/MIN
TOOL MAGAZINE CAPACITY: 40
TOOL HOLDER TYPE: ISO 7:24 JT NO. 50
PULL STUD TYPE: LD50D
POWER OF MAIN DRIVE MOTOR: 22/30 KW
TORQUE OF FEED MOTOR FOR EACH SPINDLE:
X, Z, W, B: 38 N.M
Y: 55 N.M
WEIGHT OF MACHINE: 35000 KGS
OVERALL DIMENSION: 6800 X 6230 X 4530MM
CAPACITY OF ELECTRICITY: 70 KVA
HYDRAULIC PUMP STATION
PRESSURE: 10MPA FLOW: 20L/MIN
CAP: 250L
COOLING TANK:
LIFT OF PUMP: 50M FLOW: 50L/MIN
CAP: 350L
COMPRESSED AIR:
AREA OF OCCUPATION: 7760 X 6250MM
The seller will provide one copy of complete technical documents in
English with the machine. The documents are as follows:
Machine operation manual (mechanical part, electrical part)
Electricity schematic diamgram
Hydraulic schematic diamgram
Construction schematic diamgram
Contour of machine
Machine operation specifications and alarm message introduction
Machine technical data and PLC program floppy disc
Standard Configurations
1. Center-controlled automatic lubrication
2. Chain-type chip remover
3. The control cabinet with air conditioner
4. Hydraulic oil tank
5. Working illumination
6. RS232 interface
7. Heidenhain feedback scale for B axis
Optional Configuration:
1. Heidenhain feedback scale on X,Y, and Z Axes
2. The protection on the area of work table
3. The fully enclosure for column and headstock
4. Fully enclosure for the machine
5. Enlarged work table: 1600 x 1800mm, 2000 x 2000mm
6. Enlarged travel on the axes of X,Y.Z
|
