 |
||
| Click here for a printable credit application. | ||
|
||
 |
||
 |
||
 |
||
Used Marvel Model 2125A-PC 60 Tilt-Frame Travelling Column Vertical Bandsaw
new 2008 S/N E2125-20262PC ONLY 20 HOURS USE
Equipped with:
Marvel PC-II Bandsaw Control with storage for (99) job settings
Pendant-mounted operator’s control station for saw functions
Barfeed control station with touch-pad programming
Single/Automatic cutting cycle
AC variable-frequency blade drive motor with constant horsepower at any speed
Infinitely variable blade speeds
3 degree canted column design
Power infeed to saw column with infinitely adjustable feed force
Power upper blade guide elevation
Power column tilt for mitering Left or Right
Power vise clamping, with optional second machine vise
PC- controlled barfeeder with multiple stoke capability
Table infeed roller with hydraulic lift to prevent table wear
Hard-inserted table vise ways
Hydraulic adjustable blade tensioning
Manual chip conveyor
Coolant system
Halogen work light
Factory documentation
Specifications:
20” X 25” Cutting capacity (width X height) at 90 degrees. Can cut single pieces or bundled material.
20” X 17” Cutting capacity at 45 degree miter angle.
20” X 11-1/4” Cutting capacity at 60 degree miter angle
1-1/4” wide X .042” thickness X 17’-6” Blade size
30-650 F.P.M. Blade speeds
10 HP Blade drive, 460 volts, 11 amps, 3-phase, 60-cycle
19.2 amps Total electrical requirement at 460 volts
0-350 lbs. Feed force to column for sawing
60-0-60 degrees Column tilt range, Left or Right, for Mitering
48” Max. single index stroke of feed carriage, unlimited number of strokes per feed cycle, with electronic measuring, ball linear guides, and cylinder-driven shuttle
Price: Present location, Houston, TX, loaded on truck……………………………………..$49,500.00
See www.sawing.com/html/2125APC.htm for manufacturer’s detailed information. The manufacturer’s new base price is $71,000 and the additional optional features are $6,000. The total cost new is $77,000.