SPECIFICATIONS:
ARM LENGTH: 6'
COLUMN DIAMETER: 19"
HORIZONTAL HEAD TRAVEL ON ARM: 60"
VERTICAL ARM TRAVEL ON COLUMN: 48"
VERTICAL SPINDLE TRAVEL IN HEAD: 20"
SPINDLE RADIUS, MINIMUM: 25.5"
SPINDLE RADIUS, MAXIMUM: 85"
SPINDLE-NOSE TO BASE, MINIMUM: 10"
COLUMN-FACE TO SPINDLE, MINIMUM: 12.75"
COLUMN-FACE TO SPINDLE, MAXIMUM: 78"
DRILLS TO CENTER OF CIRCLE ON BASE: 144"
BASE WORKING SURFACE, W x L: 50" X 77"
BASE HEIGHT: 10"
SPINDLE NOSE DIAMETER: 4"
SPINDLE TAPER: #6MT
SPINDLE SPEED (48 STEPS): 15 TO 1500 RPM
SPINDLE FEEDS: .004 TO .125 IPR
TAPPING LEADS: 8 TO 18 TPI
SPINDLE MOTOR: 20HP/1750RPM
ELECTRICAL SYSTEM: 220-440/3/60
EXTREME HEIGHT, COLUMN ABOVE FLOOR: 11'9"
EXTREME HEIGHT, HEAD & ARM EXTENDED: 12'1"
Equipped with:
TAPPING- L-TYPE BASE
POWER FEED TO HEAD- POWER COLUMN CLAMPING
COOLANT SYSTEM
TEMPORARY SPECIFICATIONS SUBJECT TO REVISION
